Rainbow Pride Skinny Trouser Braces

- Adjustable length from 80 cm to 120 cm (31” - 47”).

- 25mm wide elastic from Belgian weavers.

- Silver finish fittings from Germany.

- Clip-on attachment.

- Handmade in London.

Colour note: leather is a natural material and some variation between hides is to be expected. Please bear in mind that monitor settings may also create variance.

To keep your skinny braces in top condition and ensure they last as long as possible, regular maintenance is key. Here's a quick guide on how to care for them:

Braces should be cleaned occasionally, especially if worn in dusty environments or after heavy perspiration. Simply wipe them down with a damp cloth and mild soap, being careful not to stretch the elastic. Rinse the cloth frequently and wipe again with a clean, water-only cloth to remove soap residue. After cleaning, gently pat dry and allow the braces to air dry completely.

Braces should never be machine washed. The elastic will lose its stretch, clips may rust, and the leather could discolour. Avoid tumble drying as well.

For minor stains, start by dabbing the area with a slightly damp cloth (water only), taking care not to oversaturate the elastic. For tougher stains, like grease, use a mild detergent or a small amount of dish soap. As a last resort, you can try baking soda, but be cautious as it could damage the elastic. Always pat dry after cleaning to prevent any lingering moisture from affecting the braces.

By following these simple care tips, you can enjoy your braces for years to come!

A full grain, natural finish, this leather's charm comes as it is used, aged, and gathers memories.

The leather we use for our classic belts is low maintenance and easy to care for. Most small scratches can be polished out with a clean, soft cloth.

Try not to let your new leather accessory get wet; if it does, allow it to dry naturally - away from heaters - and it might be worth giving it a little condition after.

If you feel it’s in need of some extra affection, you might like to use a leather conditioner. Anything with beeswax or natural oils is best. Feel free to get in touch for our own recommendation.

We do not recommend using a coloured conditioner, as there is a high risk of colour transfer onto clothes. A neutral one will rejuvenate the colour slightly without the risk of damage.

The buckles we use for our classic belts are Brass or Zamak which shines up well with typical metal polishes. Always test the polish in an inconspicuous place first.

All of our leather is supplied by tanneries who are audited and certified by the Leather Working Group.

The Leather Working Group is the world’s largest leather sustainability program. LWG has identified environmental best practices in the industry and audits tanneries to assess the environmental performance of leather manufacturing facilities – and certifies those that meet the standards.

The leather used for our Belts is supplied by a Tuscan tannery that has a Silver Rating from the LWG, as well as being a member of The Genuine Italian Vegetable Tanned Leather Consortium.

The Consortium’s mission is to safeguard the centuries-old tradition of vegetable tanning and to guarantee the quality of the raw material and workmanship. The Consortium guarantees manufacturing processes compatible with the ecosystem and not harmful to people.

https://www.leatherworkinggroup.com/